BGP transit for ISPs, hosting providers, enterprises and content networks. Delivered by cross-connect at our PoP in North Macedonia or the Netherlands, or over any tunnel to wherever your router is. Flat-rate ports of 1, 5 and 10 Gbit/s, unmetered, IPv4 and IPv6. No contract: you pay one month at a time and stop whenever you like.
Same price in Skopje and Amsterdam, by cross-connect or over a tunnel. Flat rate, unmetered, no contract and no setup fees: the BGP session, IPv4 and IPv6 are included, and you pay for one month at a time. Tunnel delivery needs no hardware on your side; for a cross-connect the only possible extra is the data centre's own cabling charge, we add nothing.
A second upstream for a small ISP, a hosting network or a campus.
Regional ISPs, CDN and streaming nodes, busy hosting networks.
A full 10 Gbit/s port, flat, for networks that push traffic all day.
Every button opens a direct Telegram chat with @rscomputersks, with the request pre-filled. Need more than 10 Gbit/s, several ports, or capacity at both PoPs? Ask on Telegram. Prices are per month, excluding VAT where it applies. There is no setup fee, no BGP session fee, no minimum term and nothing to sign for a year: one month paid is one month of transit.
| Speed | Billing | Port | Monthly | Per Mbit/s | Traffic |
|---|---|---|---|---|---|
| 1 Gbit/s | Flat rate, monthly | 10 Gbit/s | €150 | €0.15 | Unmetered at port speed |
| 5 Gbit/s | Flat rate, monthly | 10 Gbit/s | €625 | €0.125 | Unmetered at port speed |
| 10 Gbit/s | Flat rate, monthly | 10 Gbit/s | €1,000 | €0.10 | Unmetered at port speed |
The transit price above is the same at both PoPs and for every delivery method, and we charge no setup fee on any of them. What differs is how the traffic reaches us, and whether the data centre itself bills for the cabling.
| Delivery | Setup | Monthly |
|---|---|---|
| Cross-connect inside neoDC No fee from us; neoDC bills its own cabling, if any |
None | On request |
| Remote hand-off at Telesmart Cross-connect at Telesmart, carried to our PoP over our link; transport quoted |
None | On request |
| Remote hand-off at FINKI Cross-connect at FINKI, carried to our PoP over our link; transport quoted |
None | On request |
| Tunnel (GRE, IPsec, WireGuard, ...) No hardware, no cabling, nothing to pay beyond the port |
None | Included |
| Delivery | Setup | Monthly |
|---|---|---|
| Cross-connect inside Qupra No fee from us; Qupra bills its own cabling, if any |
None | On request |
| Remote hand-off at Nikhef Cross-connect at Nikhef, carried to our PoP over our link; transport quoted |
None | On request |
| Tunnel (GRE, IPsec, WireGuard, ...) No hardware, no cabling, nothing to pay beyond the port |
None | Included |
Pick the one that fits where your network is today. You can start on a tunnel and move to a cross-connect later on the same agreement.
Bring a cross-connect to our router in Skopje or Amsterdam and get a 10 Gbit/s port, set to the speed you buy, with the BGP session straight on the link: no encapsulation, no overhead, the lowest latency to our upstreams and peers.
Not in our PoP? We terminate a tunnel on our edge and run BGP through it. Your prefixes are announced from our network in Skopje or Amsterdam, and the traffic reaches you through the tunnel over your existing internet connection. Any tunnel your router can build:
Two PoPs, the same tiers and prices at each. Reach us inside the data centre, or cross-connect at the other hubs in each city (Telesmart and FINKI in Skopje, Nikhef in Amsterdam); choose the one closest to your network, or take both PoPs for redundancy.
PoP: neoDC data centre (Neocom)
Kuzman Josifovski Pitu 15, 1000 Skopje
Carrier-neutral colocation, Tier 3+ design, ISO 27001, 24/7 remote hands.
Cross-connect also possible at:
PoP: Qupra Datacenter
Nieuwe Hemweg 26, 1013 CX Amsterdam
Carrier-neutral telecom and fibre exchange facility, with dark fibre to Nikhef, Global Switch and the Digital Realty tower.
Cross-connect also possible at:
The basics done properly, whichever tier and delivery you choose.
The session itself is free: IPv4 and IPv6, full routing table or default route, your choice. Nothing to pay to get started, on any tier or delivery.
We announce your prefixes only when the route objects and ROAs check out, which protects you and everyone downstream.
One monthly price for the port speed. No traffic sampling, no commit to stay under, no overage invoice at the end of the month.
Start on a tunnel today and move to a port at the PoP when you are ready, without starting the agreement over.
Our network and edge routers are watched around the clock, with people you can reach on Telegram.
Skopje and Amsterdam cost the same, so the choice is about latency and redundancy, not budget.
You pay one month at a time, with no setup fee. Keep the port as long as it serves you, upgrade when you grow, or walk away at the end of any month. No yearly commitment, no exit fee.
Your ASN, the prefixes you will announce, the port speed you want, the PoP, and whether you connect by cross-connect or tunnel (and which tunnel type).
We check IRR route objects and ROAs, then send our BGP peer addresses, the tunnel endpoint or cross-connect information, and the session parameters.
You configure the tunnel or patch the cross-connect and establish BGP. We confirm the announcements and traffic from our side.
You pay the first month and traffic starts flowing. Renew month by month, upgrade the port or add the second PoP whenever your traffic grows, or stop at any month end.
Yes. Every tier is a flat monthly price for the port speed you choose: 1, 5 or 10 Gbit/s. Nothing is sampled or measured against a commit, and there is no overage invoice. Push the full port all day if your network needs it.
No. Transit is sold month to month: you pay for one month, and renewing is your choice every month after that. There is no yearly contract, no minimum term and no exit fee, so you are never locked in. Many networks start with one month to test the routes and latency before moving more traffic.
Our Skopje router is in the neoDC data centre (Neocom), Kuzman Josifovski Pitu 15, 1000 Skopje: a carrier-neutral colocation facility built to Tier 3+ standards with 24/7 remote hands. If your equipment is there, order a cross-connect to our rack.
If you are elsewhere in Skopje, we also take cross-connects at two remote hand-off sites and carry them to the PoP over our own link:
Anywhere else, use a tunnel.
Our Amsterdam router is in the Qupra Datacenter, Nieuwe Hemweg 26, 1013 CX Amsterdam: a carrier-neutral telecom and fibre exchange facility with dark fibre to the main Amsterdam hubs. If your equipment is there, order a cross-connect to our rack.
Yes to Nikhef: we also take cross-connects at Nikhef Housing, Science Park 105, 1098 XG Amsterdam, home of AMS-IX and more than 200 networks, and carry them to our PoP over our own link. From any other Amsterdam facility, ask us about a cross-connect to Qupra or use a tunnel.
Any tunnel your router can build to our edge: GRE, IPIP, IPsec, WireGuard, VXLAN, L2TPv3, EoIP, OpenVPN, or anything else that carries IP. We terminate the tunnel at our PoP in Skopje or Amsterdam and run the BGP session through it, so your prefixes are announced from our network while the traffic reaches you over your existing internet connection.
Yes. A tunnel works from anywhere that can reach our PoP, which makes it the fastest way to add an upstream or to get a presence in the Balkans or the EU without a physical cross-connect. Latency to the tunnel endpoint adds to the path, so choose the PoP closest to you. Many customers start on a tunnel and move to a cross-connect later.
If you are not sure about any of these, write to us and we will walk you through it.
Yes. Each session carries IPv4 and IPv6, with the full table or a default route, whichever you prefer. Announcements are validated against IRR and RPKI.
Every cross-connect in Skopje and Amsterdam lands on a 10 Gbit/s port, whichever tier you buy; the port is set to your speed and can be raised from 1 to 5 or 10 Gbit/s later without new cabling. Over a tunnel, throughput is limited by your own uplink to the PoP. For more than 10 Gbit/s, several ports or a mix of both PoPs, ask for a quote.
Nothing from us: no setup fee, no BGP session fee, no port fee, on any tier and any delivery method. A tunnel costs nothing beyond the monthly port price. For a cross-connect the only possible extra is the data centre's own cabling charge, if it has one; a remote hand-off at Telesmart or FINKI in Skopje, or at Nikhef in Amsterdam, is quoted with the monthly transport to our PoP included and again no setup fee. The transit price itself is the same at both PoPs and for every delivery method.
A tunnel is the quickest route: once your prefixes validate we send the endpoint and BGP details, and the session can be up the same day you configure your side. A cross-connect depends on the data centre's lead time.
Send us your ASN, prefixes, the port speed you want, the PoP and the delivery method on Telegram or by email to info@rscomputers-ks.com. No contract: one month paid is one month of transit, renew only if you want to.
Send your ASN, prefixes, port speed and preferred PoP in a Telegram message to @rscomputersks. We usually reply the same day.